Product Description

We have alnico magnets for sale!

Category: AlNiCo magnets/metal perpament magnets

 

Advantages:  high magnetic energy, good temperature stability

 

Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized

 

Product Description

AlNiCo magnet is the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. AlNiCo permanent magnets birthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder AlNiCo magnets or block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.

 

According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees.  Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.

 

Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast AlNiCo magnets, but sintered AlNiCo magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.

 

 

Type	(BH)Max		Br		Hcb		D	a(Br)	Tc	Tw
	KJ/cm3	MGOe	mT	Gs	KA / m	Oe	g/cm3	%/TO	℃	℃
Ln9	9.0	1.13	680	6800	30	380	6.9	-0.03	760	450
LN10	10.0	1.20	600	6000	40	500	6.9	-0.03	760	450
LNG12	12.4	1.55	720	7200	45	500	7.0	-0.03	810	450
LNG13	13.0	1.60	700	7000	48	600	7.0	-0.03	810	450
LNG34	34.0	4.30	1200	12000	48	600	7.3	-0.02	860	525
LNG37	37.0	4.65	1200	12000	48	600	7.3	-0.02	860	525
LNG40	40.0	5.00	1250	12500	48	600	7.3	-0.02	860	525
LNG44	44.0	5.50	1250	12500	52	650	7.3	-0.02	860	525
LNG52	52.0	6.50	1300	13000	56	700	7.3	-0.02	860	525
LNGT28	28.0	3.50	1000	10000	58	720	7.3	-0.025	860	550
LNGT36J	36.0	4.50	700	7000	140	1750	7.3	-0.025	860	550
LNGT32	32.0	4.0	800	8000	100	1250	7.3	-0.025	860	550
LNGT40	40.0	5.0	800	8000	110	1380	7.3	-0.025	860	550
LNGT60	60.0	7.50	900	9000	110	1380	7.3	-0.025	860	550
LNGT72	72.0	9.00	1050	10500	112	1400	7.3	-0.025	860	550

Payment Terms︰ T/T